SMT - Juki India Private Limited

FX-3RA

High Speed Modular Mounter

Refined high-speed, high-precision technology.

Developed under JUKI's "3E EVOLUTION" concept, the ever evolving FX series has been redesigned for ease of use, efficiency, cost effectiveness and increased expandability and compatibility. Using new, highly efficient linear servomotors, lightening and stiffening the head unit, and reviewing the placement sequence allow for an effective tact of 0.040 s/chip (90,000 CPH) (optimum conditions).

Efficiency
Cost Effectiveness
Increased Expandability and Compatibility

BROCHURE (PDF)

0402mm(01005 inch) ~ 33.5mm×33.5mm
Laser recognition : ±0.05mm(±3σ)
On-the-fly centering using integrated laser
2 stations, 4 gantries, 4 placement heads, 24 nozzles
Linear servo motor XY drive with full closed-loop control
Holds up to 240 components
Electrical or mechanical feeder trolley

Item/Model		High-Speed Modular Mounter FX-3RAL	High-Speed Modular Mounter FX-3RAXL
Board size	L size(410x360mm)	yes	no
	*L-Wide size(510x360mm)1**	yes	no
	XL size(610×560mm)	no	yes
	*Applicability to long PWB1**	800×360mm	800×560mm
Component height	6mm	yes
Component size	Laser recognition	0402(01005) ~ 33.5mm×33.5mm
Placement speed (chip)	Optimum	0.040Sec. / chip(90,000CPH)*2
Placement speed (chip)	IPC9850	66,000CPH*2
Placement accuracy	Laser recognition	±0.05mm(±3σ)
Feeder inputs		Max.240 in case of 8mm tape (on a Electric double tape feeder)

*1 L-Wide size , Applicability to long PWB is optional.
*2 This speed does not apply to XL board size.

Four Gantry; 1 Head Per Gantry

Two Stations - 4Beams - 4Head Configuration

6 Nozzles per Gantry

A total of 24 nozzles

High Accuracy Laser Align Component Centering

On-the-fly Simultaneous Centering using 6-nozzle Multi-laser Head

Quick Change Feeder Trolleys

Compatible with mechanical and electronic feeders.

X-Y Linear Servomotors

New linear servomotors and full closed-loop control

Electronic Feeder Compatible

Using electronic double tape feeders enables mounting a max of 240 component types.

« »

BOARD SIZE	COMPONENT SPECS	FEEDER INPUTS	PLACEMENT SPECS
L Size: 410x360mm	Component Height: 6mm	Max.240 in case of 8mm tape (on a Electric double tape feeder)	Placement Speed (chip): • 0.040Sec./chip(90,000CPH) • IPC9850: 66,000CPH
L-Wide Size: 510x360mm	Component Size: Laser Recognition: 0402mm(01005 inch)～□33.5mm		Placement Accuracy: Laser Recognition: ±0.05mm(±3σ)
XL Size: 610×560mm

BOARD SIZE

COMPONENT SPECS

FEEDER INPUTS

PLACEMENT SPECS

L Size: 410x360mm

Component Height: 6mm

Max.240 in case of 8mm tape
(on a Electric double tape feeder)

Placement Speed (chip):

• 0.040Sec./chip(90,000CPH)

• IPC9850: 66,000CPH

L-Wide Size: 510x360mm

Component Size:

Laser Recognition:

0402mm(01005 inch)～□33.5mm

Placement Accuracy: Laser Recognition: ±0.05mm(±3σ)

XL Size: 610×560mm