A World Leader in SMT Solutions  

RX-7R
Home / High-Speed Compact Modular Mounter / RX-7R




RX-7R

High-Speed Compact Modular Mounter

Innovative Production Efficiency

Improvement for the Whole Factory


BROCHURE (PDF)

Features

•  Linking to other machines for improved productivity

•  Graphical system visualization

•  JaNets Integraton

•  New P16S head with improved accuracy

•  Simultaneous production of PCBs

•  Top and Bottom Check of Leaded Parts

•  Low impact placement force

•  High speed of maximum cluster tact 75,000 CPH

•  Compact Design – 998mm width

•  Wide Component Range

specification


High -Speed Compact Modular Mounter RX-7R
  (P16S×P16S head) (P16S×P8*1 head) (P8×P8*1 head)
Board
size
Single lane conveyer 50×50~510mm*2*3×450mm
Single lane conveyer
Single lane mode
50×50~510mm*2*3×450mm
Single lane conveyer
Dual lane mode
50×50~510mm*2*3×250mm
Component height 3mm 3mm(P16S head) 10.5mm
10.5mm(P8 head)
Component size 03015*4~□5mm 03015*4~□5mm
(P16Sノ head)
0603~□25mm
0603~□25mm
(P8 head)
Placement speed
(Optimum)
Chip 75,000 CPH 54,900 CPH 34,800 CPH
IC - 6,400 CPH*3 12,800 CPH
Placement
accuracy
Chip ±0.04mm(Cpk≧1)
IC - ±0.04mm
Feeder capacity Up to 56*6
Power supply 3 phase AC200V、220V-430V*7
  2.3kVA
Operating air pressure 0.5±0.05MPa
Air consumption (standard) 20L/分ANR(during normal operation)
Machine dimensions (W x D x H)*9 998×1,895×1,530mm 998×1,895×1,530mm*8
Mass (approximately) about 1,820kg*10

*1 Contact sales for more details

*2 The BOC, BAD mark, and 2D code can be recognized when the board size X-axis is between 50 mm and 350 mm.

*3 In long board mode.(Two PCBs up to 420mm can be produced simultaneously)

*4 Contact sales for details

*5 Using P8 head

*6 Using RF04AS or RF08AS feeders

*7 Optional transformer required for 220V - 430V

*8 P8 head requires 123mm additional space on the front for the feeder bank

*9 Display and signal light not included

*10 Using P16S x P16S head configuration, dual lane with trolleys